OFF SEASON BUILD TIME? SEARCH FOR YOUR PARTS IN ONE PLACE
GAZ
In stock
Couldn't load pickup availability

Kit Configuration
This kit allows you to adjust height and damping at all four corners of the car. This solves a number of problems that fast road and track day drivers often run into as follows such as understeer, oversteer, lack of grip. The kit is also supplied with the correct spring rates, damper valving and ride height range (see Custom Build Specs section below).
The kit can be supplied with camber adjustable front top mounts - use the drop down menu above to add these.
Please note: Images are generic and depict the Gaz GHA range and kit configuration for this listing but may not show the exact kit you purchase.
Adjustable Height
For fast road and track day cars, this allows you to lower the car, lowering the centre of gravity and reducing body roll which increases mechanical grip. You will also be able to adjust the height at one end relative to the other. This is especially useful for front wheel drive cars where you might want to run the rear ride height higher than the front to reduce understeer.
Adjustable Damping
For fast road and track day cars, this allows you to stiffen the cars suspension further reducing body roll to further increase mechanical grip. You will also be able to adjust the damping at one end relative to the other. This is especially useful for front wheel drive cars where you might want to stiffen the rear damping to reduce understeer as stiffening the rear or softening the front pushes weight onto the front wheels increasing grip.
This GHA kit uses 50mm diameter damper bodies and as such is not designed to accept the higher loadings of prolonged use with semi or full slick tyres or the very high spring rates these tyres require to generate the heat required to fully exploit their extra grip available. For dedicated track day or race car suspension using semi or full slick tyres, we recommend our Gaz Gold, Twin Adjustable or Gold Twin Adjustable kits. The listings for these can be seen by scrolling down to the related products section below.
Custom Build Specs
Whilst it is true that height and damping adjustability will allow you to fine tune your cars handling characteristics, it is absolutely vital that the spring rates and the damper valving and the ride height range of the kit are correctly specified to suit your cars specification and use.
Once you order your Gaz GHA kit from us, we email you to find out what the car is being used for, the basic specification that affects the original weight of the car (if you know the corner weights of the car so much the better), the tyres being used and the current and planned power output of the engine.
Once we understand your car and your needs, we will be supplying your kit, set up correctly for your specific needs.
Features of this Renault Clio 197 RS Gaz GHA Coilover Kit
| TOP MOUNTS |
CAMBER ADJUSTABLE TOP MOUNTS +£259, NONE |
|---|